Corrosion reduction is a key issue addressed by water storage tank engineering services, both in the design of their vessels and the maintenance that can slow down this destructive process.

The availability of different protective surface coatings is essential in water storage tank engineering, as these are one of the more commonly used methods for minimizing corrosion on different materials.

Though they are not the only form of corrosion protection that can be implemented, there are many important reasons why water storage tank engineering companies recommend protective surface coatings as part of the critical maintenance for vessels of different types.

Different Tank - Different Corrosion Issue

Regardless of the material used in water storage tank engineering, corrosion will eventually become an issue if it is not prevented ahead of time.

Corrosion is caused by a chemical reaction between different materials that are exposed to oxygen as well as the elements and can be slowed in different ways, depending on the tank material and what is stored inside it.

Based on this knowledge, the three main materials used by water storage tank engineering services in their tank designs require protection from different types of corrosion.

Fiberglass vessels are especially susceptible to sunlight.
Concrete tanks are susceptible to deterioration caused by exposure to sulfates and salt, making them more likely to experience cracks and other failures during wet/dry or freeze/thaw cycles.
Steel, which is used in various grades by water storage tank engineering companies, is susceptible to rusting or oxidation.

In all cases, one of the more efficient solutions for slowing this damage is the regular application of protective surface coatings.

The Need For Protective Surface Coatings

Water storage tank engineering services recommend protective surface coatings for corrosion prevention for a number of important reasons:

Protective interior surface coatings create a physical barrier between the tank material and its contents, preventing the chemical reactions that cause corrosion.
Protective exterior surface coatings on those vessels that require them prevent corrosion due to exposure to the elements and sunlight.
Water storage tank engineering experts also use protective interior surface coatings to prevent leaks, abrasive damage to the tank surface, water contamination, chemical attacks like low pH, chlorine loss, and the development of scale inside the vessels.

Correct Application Essential for Protective Surface Coatings

The most important detail about these coatings to ensure their protectiveness is how they are applied.

Water storage tank engineering companies recommend applying initial protective coatings during the manufacturing process so that tanks go into service already protected.

Then as needed, they should be drained, cleaned, dried out, and have their surfaces prepared again for periodic reapplications to maintain high levels of corrosion prevention.

These are recommendations water tank engineering services advise will extend the life of most tanks.

Consult With A Water Storage Tank Engineering Company

The most important part of maintaining a water storage tank is protecting it from corrosion.

Consult with a water storage tank engineering company about water tank design and finding effective methods for preventing corrosion from taking over with maintenance that includes these helpful coatings.

Water storage tank engineering experts recommend protective surface coatings as the main method for preventing corrosion on water storage tanks!